1 kg capacity
Compact portable format; verify that the listed rating covers the assessed hazard.
| Model | VFP CA 1 |
| Capacity | 1 Kgs. |
| IS No. | IS 15683:2018 — verify the current BIS licence and marking for the exact supplied model |
| Fire Rating | 8B |
| Operating Temperature | -20° C TO +55° C |
| Min. Jet Length (in mtrs) | 2 Mtrs. |
| Discharge Percentage Min. | 95% |
| Discharge Time Min. | 8 Seconds |
| Charge Pressure | 15 Kgf / cm² |
| Test Pressure | 250 Kgf / cm² |
| Operating Valves | Squeeze Grip Type |
| Extinguisher Media | HFC 236 |
| Expellant | Dry Nitrogen |
| Anti Corrosive Treatment | Phosphating (7 Tanks) |
| Painting | Epoxy Polyester Powder Coating |
| Tare Weight ( Approximate) | 1.2 kg |
| Full Weight ( Approximate) | 2.2 kg |
What is the Vintex VFP CA 1 fire extinguisher?
The Vintex VFP CA 1 is listed as a 1 kg portable clean agent fire extinguisher using HFC 236 medium with an 8B fire rating. It should only be selected for hazards covered by the exact current label, datasheet and approvals. Additional electrical or fire-class suitability must be verified rather than assumed.
Product overview
Compact clean agent extinguisher for a model-specific assessed risk
The visible product data lists a 1 kg capacity, squeeze-grip operation, dry-nitrogen expellant, approximately 8-second discharge time and HFC 236 extinguishing medium. Its compact format can support selected portable-fire requirements where the rating is appropriate.
A clean agent category name does not establish suitability for every electronic, vehicle or server-room hazard. Confirm the actual fire load, enclosure, ventilation, agent compatibility, operating conditions and local approval requirements.
Model VFP CA 1
Use this model reference when requesting current documents and quotation details.
HFC 236 medium
Request the exact agent datasheet, safety data sheet and regulatory information.
Listed 8B rating
Do not extend this rating to other fire classes without current test and approval evidence.
Standards and verification
Confirm the rating, licence and exact agent documentation
BIS lists IS 15683:2018, Portable Fire Extinguishers — Performance and Construction — Specification. If an ISI-marked unit is required, verify the current BIS licence, scope, model marking, rating and test documents for VFP CA 1. Also request the HFC 236 safety data sheet and applicable environmental or regulatory information.
Manufacturer, supplier and dealer enquiries
1 kg clean agent extinguisher supply from Mumbai across India
Vintex accepts project and bulk enquiries from facilities, contractors, consultants, system integrators and procurement teams. Share the model, exact agent and rating requirement, quantity, destination and approval conditions.
Supplier and prospective dealer enquiries are reviewed against territory, demand, product mix, commercial terms and service capability. Enquiry coverage does not mean an authorised dealer or stocked inventory already exists in every city.
Manufacturer enquiries
Request current technical data, agent information, certification and project quantities.
Supplier enquiries
Submit destination, quantity, specifications and delivery requirement for supply support.
Dealer enquiries
Share your company profile, territory, customer base and demand forecast.
Technical enquiries
Provide the hazard, equipment, location conditions and required documents.
Safety first
Use only where the exact model is rated and approved
Portable extinguishers are intended for incipient-stage fires and trained use. Agent discharge can create visibility, exposure, pressure and ventilation concerns. Follow the product label, safety data sheet and workplace emergency plan.
- Raise the alarm and contact the fire and emergency services.
- Keep a clear escape route and evacuate if conditions worsen.
- De-energise equipment only when it is safe and procedures permit it.
- Do not infer electrical suitability from “clean agent” terminology alone.
- Arrange inspection, refilling and maintenance through competent personnel.
Pan-India enquiry coverage
Manufacturer, supplier and dealer enquiries across India
Vintex accepts 1 kg clean agent extinguisher enquiries from all 28 states and 8 union territories. The cities below are representative commercial and project locations; confirm suitability, availability, documents, commercial approval, delivery and support for the exact destination.
Andhra Pradesh
Visakhapatnam, Vijayawada, Guntur, Tirupati, Nellore, Kurnool, Rajahmundry and Kakinada
Arunachal Pradesh
Itanagar, Naharlagun, Pasighat, Tawang, Ziro and Bomdila
Assam
Guwahati, Dibrugarh, Silchar, Jorhat, Tezpur, Tinsukia and Nagaon
Bihar
Patna, Gaya, Muzaffarpur, Bhagalpur, Darbhanga, Purnia and Bihar Sharif
Chhattisgarh
Raipur, Bhilai, Durg, Bilaspur, Korba, Raigarh and Jagdalpur
Goa
Panaji, Margao, Vasco da Gama, Mapusa and Ponda
Gujarat
Ahmedabad, Surat, Vadodara, Rajkot, Gandhinagar, Bharuch, Vapi, Jamnagar and Bhavnagar
Haryana
Gurugram, Faridabad, Panipat, Sonipat, Ambala, Karnal, Hisar and Manesar
Himachal Pradesh
Shimla, Dharamshala, Solan, Baddi, Mandi, Kullu and Una
Jharkhand
Ranchi, Jamshedpur, Dhanbad, Bokaro, Deoghar and Hazaribagh
Karnataka
Bengaluru, Mysuru, Mangaluru, Hubballi-Dharwad, Belagavi, Ballari, Tumakuru and Davanagere
Kerala
Thiruvananthapuram, Kochi, Kozhikode, Thrissur, Kollam, Kannur, Alappuzha and Palakkad
Madhya Pradesh
Indore, Bhopal, Jabalpur, Gwalior, Ujjain, Sagar, Satna and Dewas
Maharashtra
Mumbai, Navi Mumbai, Thane, Pune, Nagpur, Nashik, Chhatrapati Sambhajinagar, Kolhapur, Solapur, Palghar and Raigad
Manipur
Imphal, Thoubal, Bishnupur and Churachandpur
Meghalaya
Shillong, Tura, Jowai and Nongpoh
Mizoram
Aizawl, Lunglei, Champhai and Kolasib
Nagaland
Dimapur, Kohima, Mokokchung and Wokha
Odisha
Bhubaneswar, Cuttack, Rourkela, Sambalpur, Berhampur, Puri, Balasore and Jharsuguda
Punjab
Ludhiana, Amritsar, Jalandhar, Mohali, Patiala, Bathinda and Pathankot
Rajasthan
Jaipur, Jodhpur, Udaipur, Kota, Ajmer, Bikaner, Alwar, Neemrana and Bhilwara
Sikkim
Gangtok, Namchi, Gyalshing, Mangan and Rangpo
Tamil Nadu
Chennai, Coimbatore, Madurai, Tiruchirappalli, Salem, Tiruppur, Hosur, Vellore and Thoothukudi
Telangana
Hyderabad, Secunderabad, Warangal, Karimnagar, Nizamabad, Khammam and Sangareddy
Tripura
Agartala, Udaipur, Dharmanagar and Kailasahar
Uttar Pradesh
Lucknow, Noida, Greater Noida, Ghaziabad, Kanpur, Agra, Varanasi, Prayagraj, Meerut, Gorakhpur and Bareilly
Uttarakhand
Dehradun, Haridwar, Roorkee, Haldwani, Rudrapur and Rishikesh
West Bengal
Kolkata, Howrah, Durgapur, Asansol, Siliguri, Haldia and Kharagpur
Andaman and Nicobar Islands
Port Blair and other project locations across the islands, subject to logistics
Chandigarh
Chandigarh, Mohali, Panchkula and the adjoining Tricity region
Dadra and Nagar Haveli and Daman and Diu
Silvassa, Daman and Diu
Delhi
New Delhi, Central Delhi, North Delhi, South Delhi, East Delhi, West Delhi and NCR project locations
Jammu and Kashmir
Srinagar, Jammu, Anantnag, Baramulla, Kathua and Udhampur
Ladakh
Leh and Kargil, subject to project conditions and logistics
Lakshadweep
Kavaratti and other project locations, subject to logistics
Puducherry
Puducherry, Karaikal, Mahe and Yanam
Coverage note: City and state names indicate enquiry relevance. They do not represent a physical Vintex branch, authorised dealer, stocked inventory or guaranteed same-day service in every location.
Frequently asked questions
1 kg clean agent extinguisher FAQs
What is the Vintex VFP CA 1 extinguisher used for?
The visible product data lists a 1 kg HFC 236 clean agent extinguisher with an 8B rating. Use it only for hazards covered by the exact current label, approval and datasheet.
Can this 1 kg extinguisher be used on energized electrical equipment?
Only if the exact supplied model is tested, rated and approved for that use. Verify the current label, electrical-conductivity information, agent data and manufacturer instructions.
Does an HFC 236 clean agent extinguisher leave residue?
Clean agents are generally selected where solid powder or foam cleanup is undesirable, but buyers should confirm the discharge characteristics and compatibility in the exact agent datasheet and safety data sheet.
Is a 1 kg extinguisher suitable for every server room or vehicle?
No. Capacity, rating and placement must follow a competent risk assessment, the actual fire load, equipment, enclosure, ventilation and applicable requirements.
Which documents should a buyer request?
Request the current datasheet, exact agent name, fire rating, applicable BIS licence and marking, safety data sheet, test documents, operating instructions and maintenance requirements.
Does Vintex accept manufacturer, supplier and dealer enquiries across India?
Vintex accepts project, bulk-supply, supplier and prospective dealer enquiries from Mumbai, Maharashtra and all Indian states and union territories, subject to model, quantity, documentation, commercial approval and delivery confirmation.
Quick Enquiry
Contact Us