50 kg Class D Fire Extinguisher for Metal Fires

Selecting the 50 kg Model for Industrial Metal Hazards

Metal processing, fabrication and manufacturing operations may require Class D equipment where combustible metals are present. The exact metal, physical form and approved agent determine suitability; selecting a larger extinguisher does not make it suitable for every metal.

• Identify the hazard: Tell Vintex Fire which metal is present and whether it is dust, chips, swarf or another form. Request written confirmation of agent compatibility.
• Assess capacity and handling: Review the 50 kg capacity against site access, operating configuration and operator requirements. Confirm movement arrangements and the current equipment weights.
• Check documentation: Request the current VFPPL D 50 datasheet, applicable certification, agent information and operating instructions.
• Plan servicing: Confirm inspection, recharge and maintenance arrangements with the supplier.

The table retains the specifications currently listed for this model. The listed tare weight (72 kg) and full weight (112 kg) differ by 40 kg, which does not reconcile with the listed 50 kg capacity; ask Vintex Fire to confirm the current weight figures in the datasheet. Fire rating, operating temperature and charge pressure are not specified on this page. IS references identify the listed specifications; request current certification documents before purchase.

For background on metal hazards and agent compatibility, see OSHA's firefighting precautions for combustible dust facilities. This general reference does not establish certification for the Vintex model.

Manufacturer Supply, Supplier and Dealer Enquiries

Buyers searching for a 50 kg Class D metal fire extinguisher manufacturer, supplier or dealer in Mumbai, India can contact Vintex Fire directly. Provide model VFPPL D 50, required quantities, metal hazard and delivery location to confirm the technical configuration, availability and quotation.

Compare the 25 kg Class D model and 75 kg Class D model, or browse the full Class D metal fire extinguisher range. Choose capacity through the site assessment rather than weight alone.

Enquire About Model VFPPL D 50

50 kg Class D Fire Extinguisher Enquiries Across Indian Cities and States

Vintex Fire welcomes manufacturer supply, supplier and dealer enquiries for the VFPPL D 50 from industrial buyers across India. Share your city, state and delivery PIN code to confirm supply availability, freight and delivery terms for your location.

Union Territories

• Delhi: New Delhi, Delhi
• Chandigarh: Chandigarh
• Puducherry: Puducherry
• Jammu and Kashmir: Jammu, Srinagar

Enquiries from other Indian locations are also welcome. Our corporate office is in Thane, Maharashtra; the locations listed here are enquiry areas and do not indicate local branches or authorised dealers. Confirm delivery availability with Vintex Fire before placing an order.

Send your city, state and 50 kg extinguisher requirements

50 kg Class D Fire Extinguisher FAQs

What is the Vintex 50 kg Class D fire extinguisher used for?

The VFPPL D 50 is a 50 kg dry powder fire extinguisher for assessed combustible metal hazards in industrial facilities. Confirm that its supplied agent is approved for the specific metal and physical form involved before selecting this model.

What are the listed specifications of model VFPPL D 50?

The listed specifications include a 50 kg capacity, 2 m minimum jet length, 85% minimum discharge, 40-50 seconds discharge time, 30 kgf/cm² test pressure and approximately 112 kg full weight. Request the current technical datasheet to confirm these values before ordering.

How should I choose between the 25 kg and 50 kg Class D models?

Select the capacity from the site risk assessment, metal hazard, access and handling requirements. Confirm the 50 kg model's operating configuration and movement arrangements with Vintex Fire. Capacity alone does not establish agent compatibility or a fire rating.

Is a Class D extinguisher suitable for lithium-ion battery fires?

Lithium metal and lithium-ion battery thermal runaway require separate assessments. Do not assume that this Class D extinguisher is suitable for lithium-ion batteries; request a solution assessed for the specific battery and installation.

Can an ABC extinguisher replace this metal fire extinguisher?

Do not treat an ABC dry chemical extinguisher as a replacement for equipment approved for a combustible metal hazard. Select an extinguishing agent documented as suitable for the metal, its physical form and the assessed application.

How can buyers, suppliers and dealers enquire in Mumbai, India?

Contact Vintex Fire Protection Pvt. Ltd. on +91 8691070213 or info@vintexfire.com with model VFPPL D 50, the metal hazard, required quantity and delivery location. The Thane corporate office handles manufacturer supply and dealer enquiries for Mumbai and India. Commercial terms and availability are confirmed by quotation.