CORPORATE OFFICE: 1701, ORIANA BUSINESS PARK, ROAD NO. 22, WAGLE ESTATE, THANE(W), MAHARASHTRA, INDIA – 400604.

DESCRIPTION :

KV-LITE FP is based on proteineous material, which gives good sealing and excellent burn back resistance. However the spreading of the foam is slow. This limitation is overcome by incorporating fluorinated surfactant in the formulation; without affecting heat stability. KV-LITE FP is formulated with hydrolysed protein, fluorochemicals, metal salts, special stabilizers and preservatives to give the best performance and satisfactory storage. It is highly reliable, cost effective and efficient on massive hydro-carbon fires. It gives resistance to fuel pick-up and is suitable for sub-surface applications. KV-LITE FP is suitable for long pre-burn fires on Petroleum Tank Farm fires, oil jetties, refineries and offshore oil platforms.

APPLICATION :

  • KV-LITE FP is available in 3 % and 6 % concentrate.
  • It can be used with fresh water as well as sea water.
  • It can be applied with the help of all types of nozzles, inductors, foam chambers etc.
  • An ideal choice for sub-surface application as it is very highly resistant to the fuel pick up.

Fluoroprotein foam concentrate • Mumbai, India

FP foam for suitable hydrocarbon fire-protection applications

Quick answer: This page presents KV-LITE fluoroprotein foam concentrate in 3% and 6% variants. The page states that it may be used with fresh water or sea water and identifies suitable hydrocarbon and sub-surface applications, subject to professional system selection.

Manufacturer enquiries

Request current technical data, conformity documents, pack options and batch-specific information from Vintex Fire Protection.

Supplier enquiries

Ask for commercial availability, freight, lead time and project supply support for Mumbai and serviceable locations across India.

Dealer enquiries

Prospective dealers may submit their territory and business profile. Appointment, authorization and commercial terms require written confirmation.

Selection guidance

Confirm the hazard, concentration and discharge equipment

Hazard assessment

Identify the fuel, storage arrangement, pre-burn conditions and whether the proposed application is surface or sub-surface. Suitability must be established for the specific risk.

System compatibility

Confirm the correct 3% or 6% concentrate, water source, proportioning equipment, foam chamber, nozzle and inductor against current technical documents.

Project documentation

Request the current datasheet, safety data sheet, test evidence and applicable project approvals before purchase, installation or specification.

Important: No online price, stock status or dealer authorization is represented on this page. Specifications, pack size, availability, freight and lead time are confirmed for each enquiry.

India enquiry coverage

Fluoroprotein foam manufacturer, supplier and prospective dealer enquiries by state and city

Vintex is based in Maharashtra and accepts enquiries from the locations below. This indicates enquiry coverage only and does not claim a branch, warehouse, appointed dealer or immediate stock in every city.

Andhra Pradesh

Visakhapatnam, Vijayawada, Guntur, Tirupati and Nellore

Arunachal Pradesh

Itanagar, Naharlagun, Pasighat and Tawang

Assam

Guwahati, Dibrugarh, Silchar, Jorhat and Tezpur

Bihar

Patna, Gaya, Muzaffarpur, Bhagalpur and Darbhanga

Chhattisgarh

Raipur, Bhilai, Durg, Bilaspur and Korba

Goa

Panaji, Margao, Vasco da Gama, Mapusa and Ponda

Gujarat

Ahmedabad, Surat, Vadodara, Rajkot and Gandhinagar

Haryana

Gurugram, Faridabad, Panipat, Ambala and Hisar

Himachal Pradesh

Shimla, Baddi, Solan, Mandi and Dharamshala

Jharkhand

Ranchi, Jamshedpur, Dhanbad, Bokaro and Deoghar

Karnataka

Bengaluru, Mysuru, Mangaluru, Hubballi and Belagavi

Kerala

Kochi, Thiruvananthapuram, Kozhikode, Thrissur and Kollam

Madhya Pradesh

Indore, Bhopal, Jabalpur, Gwalior and Ujjain

Manipur

Imphal, Thoubal, Bishnupur and Churachandpur

Meghalaya

Shillong, Tura, Jowai and Nongpoh

Mizoram

Aizawl, Lunglei, Champhai and Kolasib

Nagaland

Dimapur, Kohima, Mokokchung and Wokha

Odisha

Bhubaneswar, Cuttack, Rourkela, Sambalpur and Berhampur

Punjab

Ludhiana, Amritsar, Jalandhar, Patiala and Mohali

Rajasthan

Jaipur, Jodhpur, Udaipur, Kota and Ajmer

Sikkim

Gangtok, Namchi, Gyalshing and Mangan

Tamil Nadu

Chennai, Coimbatore, Madurai, Tiruchirappalli and Salem

Telangana

Hyderabad, Warangal, Nizamabad, Karimnagar and Khammam

Tripura

Agartala, Udaipur, Dharmanagar and Kailasahar

Uttar Pradesh

Lucknow, Noida, Ghaziabad, Kanpur, Agra and Varanasi

Uttarakhand

Dehradun, Haridwar, Haldwani, Roorkee and Rudrapur

West Bengal

Kolkata, Howrah, Durgapur, Siliguri and Asansol

Andaman and Nicobar Islands

Port Blair and surrounding serviceable destinations

Chandigarh

Chandigarh and the Tricity region

Dadra and Nagar Haveli and Daman and Diu

Silvassa, Daman and Diu

Delhi

New Delhi and serviceable National Capital Region destinations

Jammu and Kashmir

Jammu, Srinagar, Anantnag and Baramulla

Ladakh

Leh, Kargil and serviceable project destinations

Lakshadweep

Kavaratti and serviceable island destinations

Puducherry

Puducherry, Karaikal, Mahe and Yanam

Fluoroprotein foam questions

Frequently asked questions

Which fluoroprotein foam concentrations are listed?

The page lists KV-LITE FP fluoroprotein foam concentrate in 3 percent and 6 percent variants.

Can KV-LITE FP be used with fresh water and sea water?

The application information states that KV-LITE FP can be used with fresh water as well as sea water. Confirm system compatibility and current technical guidance before use.

Where is fluoroprotein foam commonly considered?

The page identifies hydrocarbon risks including petroleum tank farms, oil jetties, refineries, offshore oil platforms and suitable sub-surface applications. A qualified professional must confirm suitability for each hazard.

Does this page publish an online price or stock offer?

No. Price, pack size, availability, freight, lead time and final specifications are confirmed for each enquiry.

Are manufacturer, supplier and dealer enquiries accepted?

Yes. Vintex accepts product, bulk-supply, project and prospective dealer enquiries. Dealer appointment and commercial terms are confirmed separately.

Can enquiries be submitted from outside Mumbai?

Yes. Enquiries are accepted from Mumbai and locations across India, subject to product suitability, availability, freight, lead time and serviceability confirmation.

Related solutions

Quick Enquiry
Contact Us